OxyBalance Oxygen Display and Averaging System
Instruction Manual
Setup | The Setup tab continas five |
| General tab, and one tab for each of the four averages. |
| General |
| Scale Values |
| Under this tab the values for the Analog full scale, Trend min value and |
| Trend max value, can be changed to represent more of an applicable |
| scale when displaying the probe or average outputs. See Figure |
| • Analog full scale - This setting controls the O2 % value represented by |
| the incoming |
| input signals must represent the same full scale value. |
| • Trend min value - This values allows the adjustment of the minimum |
| value displayed on the trend graphs on the touch screen display, |
| allowing the display to zoom in on the range of interest. This setting |
| only affects the displayed values. It has no affect on the average O2 % |
| output signals. |
| • Trend max value - This values allows the adjustment of the maximum |
| value displayed on the trend graphs on the touch screen display, |
| allowing the display to zoom in on the range of interest. This setting |
| only affects the displayed values. It has no affect on the average O2 % |
| output signals. |
Figure |
|