Emerson IM-106-4050 Maintenance and Service, Overview Panelview Plus, Instruction Manual

Instruction Manual

IM-106-4050 Original Issue March 2006

OxyBalance Oxygen Display and Averaging System

Section 5 Maintenance and Service

OVERVIEW

PANELVIEW PLUS 600

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 5-1 PanelView Plus 600 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 5-1 MicroLogix 1200 Programmable Controllers . . . . . . . . . . page 5-6

Before starting to install this equipment, read the "Safety Instructions" in Appendix A: Safety Data. Failure to follow the safety instructions could result in serious injury or death.

Disconnect all power before installing or replacing components. Failure to disconnect power may result in electrical shock and/or damage to the equipment.

Install all protective equipment covers and safety ground leads after installation. Failure to secure covers and ground leads could result in serious injury or death.

This section describes the removal and replacement of the PanelView Plus 600 and the MicroLogix 1200 Programmable Controllers.

The PanelView Plus 600 touch screen interface is visible through the front panel cutout. The internal circuitry is housed inside the NEMA 4X protective enclosure.

The PanelView comes equipped with the following features:

•AC or DC power connection and cord

•Mounting lever slots

•RS-232 and USB ports

•Touch screen interface

•Communication module and cord

•Compact flash memory card slot

http://www.processanalytic.com