Emerson IM-106-4050 Current, Probes, OxyBalance Oxygen Display and Averaging System

Instruction Manual

IM-106-4050 Original Issue March 2006

OxyBalance Oxygen Display and Averaging System

Current	Selecting the Current tab on the right side of the touch screen will display the
	Current screen. The two tabs at the top of the screen will display the Probes
	and Averages information.
	Probes

The Probes tab, shown in Figure 3-6,displays the status and the oxygen percentage for each of the eight possible probes. The color of the bar denotes the status of the probe signal.

•Green = Probe is OK

•Blue = Probe is in calibration

•Red = Probe has failed

•Yellow = Analog input signal is outside the normal range, but not far enough to be considered failed.

NOTE

If a probe signal level is not shown in green, then it is not being used in any average calculations.

Figure 3-6provides an example of a Probes tab with probes in several of these conditions. Probe 1 is in Fault condintion, and probe 5 is in calibration. Neither of these probes will be used in any average calculations.

Figure 3-6. Probes Tab

3-7