OxyBalance Oxygen Display and Averaging System
Instruction Manual
Signal Pass Through Terminals
The pass through terminals are located on the input terminals. These terminals provide connection points for passing on the incoming O2 signal to other devices.
Output (Average) Terminals
These terminals provide a connection point for the average O2%
Failure / Warning Terminals
These terminals provide connection points for the output signal warning and failure contacts.
In Cal Terminals
These terminals provide connection points for In Cal signals from the individual oxygen probes. When a probe is in calibration, it is removed from any average calculations.
Power Terminals
This terminal provides wire contacts for power distribution in the OxyBalance system.
OxyBalance operating specifications are listed in Table