Emerson IM-106-4050 Physical Description, PanelView Plus, I/O Modules, Input Terminals

Instruction Manual

IM-106-4050 Original Issue March 2006

OxyBalance Oxygen Display and Averaging System

Physical Description

Aside from the PanelView Plus 600, the OxyBalance system consists of iadditional components mounted on three DIN rails. The main components are shown in Figure 1-2.

PanelView Plus 600

The PanelView Plus 600 is the touch screen interface located on the front of the OxyBalance system, all probe readings and averages are displayed through this interface. There is also a power cord and communications cord that connect to this module.

MicroLogix 1200 Programmable Logic Controller

PLC

The PLC process the raw data received by the OxyBalance. The processed data is transmitted to the PanelView Plus 600, where it is displayed on the touch screen interface.

I/O Modules

Also known as the expansion I/O, these modules act as part of the controller system and are located on the right side of the PLC unit.

Input Terminals

This row of terminals receives the 4-20 mA signals from the O2 probes.

Figure 1-2. OxyBalance Components

	MicroLogix 1200
Power		Programmable
Terminals		Logic Controller	I/O Modules

PanelView	Signal Pass	Input	Output
Plus 600	Through Terminals	Terminals	Terminals

PLC

Failure

Terminals

Failure/

Warning

Terminals

In Cal

Terminals

38370016

1-3