6 Command Reference Guide
Command Summary
In the summary below, all commands are presented alphabetically. If the keywords are either set, define or change, only change is listed. Page numbers are provided as a quick directory to find an explanation of the command.
arp | 10 | |
change node node_nam ip ip_address [tcpip] [gateway | 14 | |
[default]] [syslog facility] |
| |
change port port_num [input output] speed baud_rate | 20 | |
change port port_num access [dynamic local remote | 18 | |
virtual slprt none] |
| |
change port port_num authorized groups group_list | 31 | |
[enabled disabled] |
| |
change port port_num fonts add “font_list” | 28 | |
change port port_num fonts remove “font_list” [all] | 28 | |
change port port_num mapcrlf [enabled disabled] | 19 | |
change port port_num type [ansi hardcopy softcopy] | 19 | |
change server console port_num | 23 | |
change server domain domain_name | 26 | |
change server dump [enabled disabled] | 42 | |
change server groups group_list [enabled disabled] | 30 | |
change server login password “pass_txt” | 13 | |
change server maintenance password “pass_txt” | 13 | |
change server name prntsvr_name | 21 | |
change server netware context “con_txt” | 35 | |
change server netware fast printserver [enabled | 34 | |
disabled] |
| |
change server options option_list [enabled disabled] | 24 | |
change server rarp n m [temp] | 39 | |
change server route IP dest_ip gateway gwy_name gwy_ip | 36 | |
change server snmp com_name access acc_right [trap IP | 25 | |
|
|
|
