44 Command Reference Guide
Service Commands
Change Service
Specify the name of the service to be established or modified.
>Server>> [set define change] service “servc_name” [TCPport_num] [port port_num] [password “pass_txt”] [protocol] [enabled disabled]
“servc_name” Enter the name of the service to be created or modified, enclosed in quotes. The maximum length of service names depend on the protocol: NetWare - 47, LAT - 16, Apple - 32.
TCPport_num Enter the TCP/IP port number of the service to be created. If this is omitted for a new service, the printer server creates the services as a LAT- only service. Enter the TCP/IP port number to create a service that is a combined LAT- compatible and TCP/IP service.
port_num Enter the port number on which the service is being established. If on all ports, enter ALL. RCF ports will not change, but the command does affect virtual ports.
“pass_txt” Enter 1 to 16 characters, beginning with a letter of the alphabet, and enclose the word in quotes. To remove password protection from the service, enter Password “ “. The default is none.
protocol Enter one of these protocols: AppleTalk, LAT, NetBios, NetWare, TCP/IP.
