20 Command Reference Guide
Change Port Speed
Set the serial communication speed (baud rate) in bits per second.
>Server>> [set define change] port port_num [input output] speed baud_rate
port_num | The port affected by speed change. |
input | Enter the speed at which data is received. If |
| input speed is not chosen, the command sets |
| the speed in both directions. |
output | Enter the speed at which data is transmitted. If |
| output speed is not chosen, the command sets |
| the speed in both directions. |
baud_rate | Enter a speed: 75, 110, 134, 150, 300, 600, |
| 1200, 2400, 1800, 2000, 2400, 4800, 9600, |
| 19200, 38400. |
Show Port Status - NETJet
Display port status for NETJet printer servers and MIO interfaces.
>Server>> [show monitor] port port_num status [netjet device]
port_num | Enter the port number for which status is |
| desired. |
netjet | Gives the status for NETJet connected to MIO |
| interface (port 1). |
device | Gives the status of a |
| printer interface. |
