Emulex Printer Server manual Enabled disabled, Ipaddr set enabled disabled

Command Reference Guide 7
ip_addr] [set] [enabled disabled]
change service “servc_name” [port port_num]	44
[TCPport_num] [password “pass_txt”] [protocol]
[enabled disabled]
crash 300	10
define node node_name [nfserver npserver]	16
define port port_num appletalk backspoof [enabled	27
disabled]
define port port_num appletalk tbcp [enabled	27
disabled]
define server authorize protocol [all none	26
specific] [enabled disabled]
define server bootp n m [temp]	38
define server dhcp n m [temp]	39
define server gateway [load_dump] ip [ip_address	41
none]
define server load [selfload TFTP [put] decnet]	40
define server netware [default 802.2 snap 802.3	34
ethernet_II ether_type]
define server netware forms [enabled disabled]	35
define server netware nds “tree_name”	36
define server netware password “pass_txt”	31
define server netware pserver [auto disabled 3.x	35
4.x]
define server netware rediscover minutes	34
define server netware required [enabled disabled]	33
define server netware rprinter [enabled disabled]	34
define server preferred dump ip ip_address	42
define server preferred load ip ip_address	40
define server software file_name	41
define service “servc_name” appletalk type “prn_type”	45
delete node node_name [all ip ip_address tcpip	16
gateway nfserver npserver syslog]
delete service “servc_name”	45