Emulex manual General Commands, Display Internal ARP Table, Halt Printer Server, Help

10 Command Reference Guide

General Commands

Display Internal ARP Table

Display or control the printer server’s internal address resolution protocol (ARP) table.

>Server>> arp [-a] [-b] [-d] [-f] [-l] [-s] [-t]

-a	Displays the ARP table.
-b	Caches all ARP entries broadcast on the
	network.
-d	Deletes specified IP address entry.
-f	Fixes all entries in the table (turns off timer).
-l	Caches only locally addressed mappings.
-s	Allows addition of the server IP and MAC
	addresses.
-t	Turns on timer.

At least one option must be entered, but only one option can be specified in a single arp command.

Halt Printer Server

Stop printer server causing memory dump to the dump host and printer server reinitialization. All users are logged off and all sessions are disconnected without any warning.

>Server>> crash 300

The entire command “crash 300” must be entered to be effective.

Help

Refers the user to the User Guide for Emulex Printer Servers.

>help