Emulex Printer Server manual Other Options, Enable or disable special printer server options

24 Command Reference Guide

Other Options

Enable or disable special printer server options.

>Server>> [set define change] server options option_list [all enabled disabled]

option_list Enter a list of options from the available options section below.

all	Enables all options.
enabled	Adds the specified option to the existing option
	list. If not specified, the existing list is replaced
	by the new one.
disabled	Removes a specified option from the existing
	option list. The default is none -- all options
	disabled.

Available options are:

0	Enable unknown frames (bypass protocol frame
	filter).
2	Enable use of 0’s (not 1’s) in host portion of IP
	broadcast address.
3	Pack Group Codes into smallest number of bytes.
4	Host Initiated Requests announce supported
	services.
5	Print Information-Only messages to the console
	port.
6	Print Non-Fatal error messages to the console
	port.
7	Reserved.
8	Reserved.
9	Inhibit round robin port allocation.

10Enable fast TCP/IP acknowledge to speed up 38400 baud and parallel ports.

11Force an IP (or ARP) datagram to be sent out when route cannot be found.

15Enforce LAT Circuit Timer (slows performance for bridged LAT usage and prevents timeouts).