Command Reference Guide 37
Establish or Change TCP/IP Nodes
Establish or change a TCP/IP node.
>Server>> [set define change] node [node_name ip ip_address] [tcpip gateway [default] syslog facility]
node_name Enter either the TCP/IP full node name or the IP address of the node. See naming conventions in beginning of this section.
ip_address | The IP address of the designated node in |
| decimal dot notation. For example, |
| 123.234.345.490 |
tcpip | Establishes the node as a TCP/IP node in the |
| printer server’s internal node table. |
gateway | Establishes the node as a TCP/IP gateway, |
| which allows communication between segments |
| on a network. |
default | If entered along with the gateway option, defines |
| the TCP/IP gateway to be the first gateway seen |
| after the routing table is checked. |
syslog | Establishes the node as a TCP/IP syslog node, |
| which is designated to receive events or errors. |
facility | Entered with syslog, this option defines what |
| type of facility reporting is done (LPR, local0 to |
| local7). Default is LPR. |
IMPORTANT: Since only 10 entries are allowed in the permanent table, a Set command may succeed when Define or Change generates a node table full error.
