EnGenius Technologies user manual ESR-9710 Wireless N Gigabit Router

ESR-9710 Wireless N Gigabit Router Version 1.0

ƒWPA Mode: Select the WPA / WPA2 from the drop-down list.

ƒCipher Type: Select TKIP or AES as the cipher suite. The encryption algorithm used to secure the data communication. TKIP. Use TKIP only. TKIP (Temporal Key Integrity Protocol) provides per-packet key generation and is based on WEP. AES. Use AES only. AES (Advanced Encryption Standard) is a very secure block based encryption. Note that, if the bridge uses the AES option, the bridge can associate with the access point only if the access point is also set to use only AES. TKIP and AES. The bridge negotiates the cipher type with the access point, and uses AES when available.

ƒGroup Key Update Interval: Specify the number of seconds before the group key used for broadcast and multicast data is changed.

ƒAuthentication Timeout: Specify the number of minutes after which the client will be required to re-authenticate.

ƒRADIUS Server IP Address: Specify the IP address of the RADIUS server.

ƒRADIUS Server Port: Specify the port number of the RADIUS server, the default port is 1812.

ƒRADIUS Server Shared Secret: Specify the pass-phrase that is matched on the RADIUS Server.

ƒMAC Address Authentication: Place a check in this box if you would like the user to always authenticate using the same computer.

ƒOptional Backup RADIUS server: This option enables configuration of an optional second RADIUS server. A second RADIUS server can be used as backup for the primary RADIUS server. The second RADIUS server is consulted only when the primary server is not available or not responding.

ƒClick on the Save Changes button to store these settings.

39