Unpacking the 6H352-25

3.1UNPACKING THE 6H352-25

Unpack the module as follows:

1.Open the box and remove the packing material protecting the 6H352-25.

2.Verify the contents of the carton as listed in Table 3-1.

Table 3-1 Contents of Module Carton

Item

Quantity

 

 

The 6H352-25 Module

1

 

 

Antistatic Wrist Strap

1

 

 

Manual Accessory Kit

1

 

 

3.Remove the tape seal on the non-conductive bag to remove the 6H352-25.

4.Perform a visual inspection of the module for any signs of physical damage. Contact Enterasys Networks if there are any signs of damage. Refer to Getting Help for details.

3.2INSTALLING OPTIONAL HSIM, VHSIM, OR FLASH MEMORY UPGRADE

NOTE: Install any optional equipment before proceeding to Section 3.3.

If the 6H352-25 is to be installed with an optional HSIM or VHSIM, refer to the user’s guide of the HSIM or VHSIM for complete installation instructions, or Appendix B for the placement of the HSIM or VHSIM on the 6H352-25.

For a FLASH memory upgrade, refer to Appendix B for installation instructions.

3-2Installation

Page 28
Image 28
Enterasys Networks manual Unpacking the 6H352-25, Installing Optional HSIM, VHSIM, or Flash Memory Upgrade