Using LANVIEW
Table 4-1 LANVIEW LEDs (Continued)
LED | Color | State | Recommended Action |
|
|
|
|
TX | Off | Port enabled, and no |
(Transmit) |
| activity. |
|
| Should flash green every |
|
| two seconds indicating |
|
| BPDUs being sent if STA |
|
| is enabled and there is a |
|
| valid link. |
1.Ensure that the STA is enabled and that there is a valid link.
2.Contact Enterasys Networks for technical support.
| Green | Flashing. Indicates | None. |
|
| activity. Rate indicates |
|
|
| data rate. |
|
|
|
|
|
| Amber | Blinking. Port in | 1. Ensure that the port is not disabled. |
|
| standby. | 2. Contact Enterasys Networks for technical |
|
| Port may be disabled due | support. |
|
|
| |
|
| to Spanning Tree. |
|
|
|
|
|
| Red | Flashing. Indicates | None, unless there is a high amount of |
|
| collision rate. | activity. In this case, check for network |
|
|
| configuration problems or a defective |
|
|
| device. |
|
|
|
|
|
| Solid. Diagnostic failure. | Contact Enterasys Networks for technical |
|
|
| support. |
|
|
|
|
