Micro Feed

Adjusting the loading position

The loading position is the position of the paper after it has been automatically loaded by the printer. If printing is too high or low on the page, change the loading position with the micro-feed feature as follows:

1.Make sure the printer is turned on.

2.Load either continuous or single-sheet paper. (Load continuous paper by pressing the LOAD/EJECT button.) The MULTI-PARTlight begins to blink.

Note: You can adjust the loading position only while the MULTI- PART light is blinking.

3.While holding down the ALT button, press the LOAD/EJECT

button to adjust the loading position to a lower position on the page; press the LF/FF button to adjust the loading position to a higher position on the page. The MULTI-PARTlight stops blinking

after a short time.

3-14 Using the Printer