Cut-Sheet Feeders

Two cut-sheet feeders are available for use with your printer:

 

 

Single-bin

High-capacity

 

 

 

 

ActionPrinter

5000

C80637*

C80638*

ActionPrinter

5500

C80639*

C80640*

* Substitute for last digit, which varies by country.

The single-bin cut-sheet feeder holds up to 50 single sheets of paper and the high-capacity cut-sheet feeder holds up to 150 sheets of paper or up to 25 envelopes.

By connecting both cut-sheet feeders, you can operate them as a double-bin cut-sheet feeder (see Assembling the double-bin cut-sheet feeder). This allows you to load two different types of paper automatically.

Assemble the cut-sheet feeder by following the instructions in the manual that comes with it.

Installing a cut-sheet feeder

You follow the same steps to install either the single-bin or high- capacity cut-sheet feeder:

1.Make sure the printer is turned off. Remove the paper guide and printer cover.

2.If the standard tractor is installed in the pull-tractor position, remove it and re-install in the push-tractor position. If the optional pull tractor is installed, remove it. In either case, make sure the paper-tension unit is installed.

Note:

•Store the paper guide and optional pull-tractor in a safe place; you will need them if you remove the cut-sheet feeder.

•If you install the single-bin cut-sheet feeder, you need to re- install the paper guide after you load the paper.

4-2 Using Printer Options