Cut-Sheet Feeders

3.Make sure the paper-release lever is in the single-sheet position.

4.Hold the cut-sheet feeder in both hands and press back on the latch levers on each side. Fit the notches in the cut-sheet feeder over the mounting posts on the printer. Release the latch levers and lower the cut-sheet feeder until it rests on the printer.

5. Replace the printer cover.

You are now ready to load paper with your cut-sheet feeder.

Removing a cut-sheet feeder is the reverse of the steps above.

Loading paper with the single-bin cut-sheet feeder

Load paper using the single-bin cut-sheet feeder as follows:

1. Turn off the printer. Remove the paper guide, if necessary.

Using Printer Options 4-3