Transporting the Printer

If you need to transport your printer some distance, carefully repack it using the original box and packing materials, as described below:

1.Turn off the printer.

2.Unplug the power cord from the electrical outlet; then disconnect the interface cable from the printer.

3.Remove the paper guide.

4. Remove the optional pull tractor and cut-sheet feeder or feeders, if installed.

5.Remove the ribbon cartridge.

6.Remove the paper-tension unit. Attach the protective locking clip to the paper-tension unit, and then replace the paper-tension unit. See page 1-5.

7.Make sure the standard tractor is installed in the push-tractor position.

8.Repack the printer, ribbon cartridge, paper guide, and power cord in the original packing materials and place them in the printer’s original box.

5-4Maintenance and Transportation