Printing with EPSON Stylus RIP for Macintosh

If you connected the printer via a network interface card and use AppleTalk zones, select the printer’s zone and then select the printer name. Or use the Scan button to locate the printer on your network.

Click OK once you select the printer and port.

Note:

If you change your printer connection later, you must reconfigure EPSON Stylus RIP for your new port. To do so, start EPSON Stylus RIP and select Printer Connection from the PostScript menu. Follow the on-screen instructions.

6.If the printer has not been previously licensed for PostScript, or this is the first time you’ve run the Stylus RIP Server, a dialog box prompts you for your EPSON Stylus RIP license key. (The license is printed on your CD-ROM sleeve.) Type it exactly as shown and click OK.

The Stylus RIP Server software searches for the printer, checks printer settings and licenses, and then displays the Stylus RIP server window. Leave the window open.

If you’re using EPSON Stylus RIP on a standalone Macintosh, continue with “Setting Up Your PostScript Printer” on

page 2-5.If you’re using EPSON Stylus RIP on a network, or if you want to set preferences, follow the steps in the next section to configure the software for your system.

2-3