Troubleshooting
Your printout has misplaced images or type
Possible cause | Solution |
Your system doesn’t | Print from your application without starting Stylus |
have enough | RIP. Then close your applications before you run |
memory to run Stylus | the EPSON Stylus RIP software. |
RIP. | Add RAM to your computer. |
| |
|
|
Printed images are clipped at the edges
Possible cause | Solution |
|
|
You selected the wrong paper size in Page Setup or Print Setup.
Make sure you select the paper size that corresponds to the paper in the printer.
You are printing a | Check your printer documentation for information |
document with | on the maximum printable area on your printer and |
margins larger than | format your document so it fits within that area. |
the printable area of | Also check that your printer software settings are |
your printer. | correct for the document. |
|
|
On a Macintosh, you | Follow the instructions under “Setting Up Your |
selected the wrong | PostScript Printer” on page |
printer name in the | select the correct printer icon, AppleTalk zone, and |
Chooser. | printer name. Then try printing again. |
|
|
Your Macintosh freezes when you try to print from QuarkXPress
Possible cause | Solution |
Quark balloon help | Drag the QuarkXPress balloon help to the trash. |
caused a conflict. |
|
|
|
Your Macintosh loses custom page sizes when selecting PDF file output from QuarkXPress 3.3x
Possible cause | Solution |
The settings in | When selecting the PDF format, select Generic |
QuarkXPress are | Color in order to select the custom page sizes that |
incorrect. | were originally created. |
|
|