Printing with EPSON Stylus RIP for Macintosh
4.If you have an EPSON Stylus Color 1520 or 3000 printer, or an EPSON Stylus Photo 1200, 1270, or 2000P, choose one of the following for the Paper Options setting:
◗Print Using Roll Feed Media
Make sure you choose this setting when you’re printing on roll paper; otherwise, the printer will eject the entire roll of paper.
◗Print Using Cut Sheet Media (printer’s default) Make sure you choose this setting when you’re printing on single sheets of paper; otherwise, the top and bottom edges of your image may be clipped.
5.To send the print job to the Stylus RIP Server with the selected options, click Print. To make your settings the future default settings, click Save Settings.
Starting the EPSON Stylus RIP Server Software Automatically
Note:
Because the Stylus RIP Server software uses a lot of system resources, you may want to start it automatically only on a print server that is dedicated to printing PostScript documents.
Follow these steps to set up the Stylus RIP Server software so it starts automatically each time you turn on or restart your standalone Macintosh or print server:
1.Turn on the printer and the standalone or print server Macintosh.
2.Click the StylusRIP Server icon in the Stylus RIP folder to select it.