Printing with EPSON Stylus RIP for Macintosh

Sending the Print Job

To print a document from an application, follow these steps:

1.Open the document you want to print in your application.

2.Select Page Setup from the File menu. The Adobe Page Setup dialog box appears. Set the print options for your document and click OK.

3.Once you have set up the page, select Print from the File menu. The following dialog box appears:

Click here to select different categories of print job options; see page 2-10

Click here to

 

save the

 

current settings

 

as the default

Click here to print your document

settings

 

4.Select the number of copies, page range, and paper source you want. Make sure the Destination option is set to

Printer, not File.

If you want to use the “drag and drop” printing method described on page 2-15,select File instead, and make sure you print to a “PS,” not “EPS,” file.

To set options for your print job, choose a print job option category from the General pop-up menu. See page 2-10.

5.Click Print. The application sends the print job to the Stylus RIP Server software for processing and printing.

2-9