Printing with EPSON Stylus RIP for Macintosh

◗Raster Spool Mode

This checkbox turns the raster image spooling feature on and off —the default setting is off. Raster Spool Mode is recommended only when you frequently print multiple copies of the same page.

In Raster Spool Mode, the Stylus RIP Monitor appears on your screen when you print. See page 2-17for more information.

Note:

The Timeout, Network Name, and Job Priority settings go into effect when you click OK and exit the Preferences dialog box. However, you must exit and restart the Stylus RIP Server software before a change to the Raster Spool Mode setting can take effect.

3. Click OK to accept the changes.

Setting Up Your PostScript Printer

Before you can print with the EPSON Stylus RIP software from any Macintosh, you need to set up the Chooser and select the correct PostScript Printer Definition (PPD) file on the Macintosh you are printing from.

You should double-check these settings before printing to the Stylus RIP Server, especially if you regularly print to different printers on a network or save PostScript print files for printing on printers not connected to your network.

2-5