Introduction
Macintosh System Requirements
To use EPSON Stylus RIP with a Macintosh in either a standalone or network environment as a print server, your system should meet the following minimum requirements:
◗Power Macintosh,® iMac™ series, or Power Macintosh G3 or G4 series
◗At least 16MB of available RAM for the EPSON Stylus RIP software (20MB or more is recommended), in addition to the RAM needed by your operating system and other applications
◗At least 52MB of free hard disk space to install the software and at least 150MB of free hard disk space for processing large files
◗Macintosh Operating System 8.5.1 or later
◗
◗Serial, Ethernet, or USB connection to the printer. The USB connection can be either a
To set up a Macintosh as a client on a network using the EPSON Stylus RIP, your system must have the following minimum configuration:
◗Macintosh Centris,® Macintosh Quadra,® Performa,® Power Macintosh, iMac series, or Power Macintosh G3 or G4 series
◗Ethernet™ AppleTalk® connection with the Macintosh set up as the EPSON Stylus RIP print server
◗8MB RAM
◗At least 2MB of free hard disk space to install the software and at least 150MB of free hard disk space for processing large files
◗Macintosh Operating System 7.6.1 or later
◗
3