note

You cannot use the EMP Link V software on a Macintosh that doesn’t have a serial port.

Connecting the Mouse and Serial Cables

You may need to connect the mouse or serial cable in the following situations:

■If you want to use the remote control in place of your computer’s mouse, you need to connect the mouse cable as described below. (When presenting with EasyMP.net instead of from a computer, you don’t need to use the cable.)

■If you want to use the EMP Link V software on a Macintosh, or on a Windows PC that’s not connected to the network, you need to connect the serial cable as described below.

1.Connect the round end of the main cable to the projector’s Mouse/Com port, as shown.

PC serial cable

mouse cable

Mouse/Com port

main cable

2.To use the remote control as a wireless mouse, choose the correct mouse cable for your system:

■

PS/2 mouse

■

PC serial mouse

■

USB mouse

■

Mac mouse
22Setting Up the Projector