Capturing Images

You can save a projected image on the memory card for display at a later time, as described below. You can also capture an image and set it to be used as your startup screen, as the screen displayed when the projector isn’t receiving a signal, or as the screen you see after pressing the A/V Mute button; see the next page for instructions. The image can be a company logo, slogan, photograph, or any other image you want to use.

Capturing an Image on the Memory Card

To save an image on the memory card, start by displaying the image you want to use. It can be from any connected device, such as a computer, DVD player, or digital camera. (But if you switch to EasyMP.net, you have to use EasyMP’s capture function; see the User’s Guide for details.) Follow these steps:

1.Press the Menu button on the control panel or remote control. You see the menu screen.

2.Highlight the Capture menu, then press Enter.

Video

Image Capture

Execute

Audio

User's Logo Capture

Execute

Effect

 

 

Setting

 

 

Capture

 

 

Advanced

 

 

About

 

 

Reset All

 

 

:Select :Enter

3.Make sure Image Capture is highlighted and press Enter.

4.When you see the message “Do you save the present image to the Memory Card?” select Yes and press Enter.

5.On the next screen, select Yes again and press Enter. After a moment, the projector displays the name of the captured image (1.jpg, 2.jpg, etc.).

Fine-tuning the Projector 75