2.Select how the projector is connected (by a serial cable or over the network) and then choose the correct COM port or networked projector name, if necessary.

Once connected, you see the EMP Link V control panel.

Many of the settings are the same as those used in the projector’s menu system, described starting on page 67. For more information, see the online EMP Link V User’s Guide. (Click Start, Programs, and EasyMP, then click EMP Link V and select User’s Guide.)

Using a Browser

To control the projector from a standard web browser, the projector must be connected to a network (as described on page 31) and properly configured to the network as described on page 48.

1.Open a web browser (such as Microsoft Internet Explorer) and enter the projector’s IP address as the location you want to go to.

Fine-tuning the Projector 65