caution

Do not touch the glass portion of the lamp assembly. Touching the glass could result in premature lamp failure.

6.Gently insert the new lamp as shown below. Make sure it’s inserted all the way.

Tighten the screws on the new lamp.

7.Replace the lamp cover and tighten its screws. (Make sure the lamp cover is securely fastened. The projector turns itself off if the lamp cover is open.)

8.Reset the lamp timer as described in the next section.

Resetting the Lamp Timer

After you install a new lamp, you need to reset the timer so the projector can keep track of how many hours it has been used. Follow these steps:

1.Plug in the projector and turn it on (see page 36).

2.After the projection lamp comes on, press the Help button and hold it down for at least 5 seconds. You see the Help menu and then a message asking if you want to reset the lamp ON time.

3.Use the left arrow button (control panel) or press left on the Enter button (remote control) to select Yes.

4.Press Enter to reset the timer.
88Maintaining and Transporting the Projector