Adjusting the Height of Your Image

You can adjust the height of the image using the lens shift knob and the projector’s feet.

Using the Lens Shift Knob

Use the lens shift knob to raise or lower the image. If the knob is recessed, press and release it to make it extend; then turn it clockwise or counterclockwise to move the lens up or down. When you’re finished, press the knob back in.

lens shift knob

Using the Projector’s Feet

If the image is still too low, you can raise it by extending the projector’s feet.

1.Stand behind the projector. Pull up the blue foot release levers and lift the front of the projector. This unlocks the feet.

caution

Do not hold the projector by the lens; this can damage it.

Displaying and Adjusting the Image 41