Connecting S-Video

If your video source has an S-Video jack, you can use it to project a higher quality video image. However, you’ll need an S-Video cable, which may be included with your video source, or can be purchased separately.

Before starting, make sure the projector and your video source are turned off.

1.For S-Video, insert one end of an S-Video cable into the projector’s S-Videoconnector. Insert the other end into the S-video port of your video source.

S-Video cable

S-Video connector

2.To use the projector’s built-in speaker system, connect the RCA audio cable to the S-Audio/Audio2ports of the projector (insert the white plug into the L port and the red plug into the R port). Connect the plugs at the other end of the cable to the audio output ports of the video source.

3.If you’re planning to use S-video for the picture-in-picture video source, be sure to set the P in P menu option as described on page 78.

Setting Up the Projector 29