Cleaning the Air Filter

Clean the air filter at the bottom of the projector after every 100 hours of use. If it is not cleaned periodically, it can become clogged with dust, preventing proper ventilation. This can cause overheating and damage the projector. To clean the air filter, follow these steps:

1.Turn off the projector and unplug the power cable.

2.Turn the projector on its side so that the handle is on top and you can access the filter easily.

3.To clean the filter, use a small vacuum designed for cleaning the inside of computers and other office equipment. If you don’t have one, you can use a very soft brush (such as an artist’s camel hair brush).

4.If the dirt is difficult to remove or if the filter is torn, replace it. Contact your dealer or call EPSON at (800) 873-7766 in the United States and Canada to obtain a new one.

note

When you get a replacement lamp for your projector, a new air filter is included. You should replace the filter when you replace the lamp.

Maintaining and Transporting the Projector 85