2. Move the feeder guard towards you.
3.Fan a stack of paper, and then tap it on a flat surface to even the edges.
4.Slide out the left edge guide. Load the stack of paper with the printable side up so it is resting against the right side of the feeder, and then slide the edge guide against the paper.
Note:
❏Always load paper into the sheet feeder’s short edge first.
❏Use the line on the feeder guard as an indicator when loading paper. The right edge of paper is aligned with the line on the feeder guard.
❏Make sure that the paper stack fits under the arrow mark inside the edge guide.
