When choosing a power source

Use only the power cord that comes with this product. Use of another cord may result in fire or electric shock.

This product’s power cord is for use with this product only. Use with other equipment may result in fire or electric shock.

Use only the type of power source indicated on the label on the back of this product.

Be sure your AC power cord meets the relevant local safety standards.

Do not use a damaged or frayed power cord.

If you use an extension cord with this product, make sure that the total ampere rating of the devices plugged into the extension cord does not exceed the cord's ampere rating. Also, make sure that the total ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet's ampere rating.

If you plan to use this product in Germany, the building installation must be protected by a 10 or 16 amp circuit breaker to provide adequate short-circuit protection and over-current protection for this product.

When handling ink cartridges

Do not open the ink cartridge packages until just before you install them.

Before installing the new ink cartridge, shake it four or five times before opening its package.

Do not shake the ink cartridge after removing from the package; this can cause leakage.

2Safety Instructions

Page 8
Image 8
Epson CX5400 manual When choosing a power source, When handling ink cartridges