6.Tilt the pull tractor back until its rear latches click into place over the printer’s rear mounting pins.

7. Close the printer’s top cover.

Using the pull tractor with the front tractor

If you are using labels, or multi-part forms with more than four parts including the original, you should use the pull tractor with the printer’s built-in front tractor.

You can switch between the front and rear tractors at any time when you are using the pull tractor. Just press the FRONT/REAR button and then use the FORM FEED button to feed the paper the additional distance to the pull tractor. (Labels require special handling. See the section on using labels in Chapter 2.)

The automatic tear-off feature does not work when the pull tractor is installed. To tear off documents, press the FORM FEED button to advance the paper to a point where it can be torn off.

Using the Printer Options

6-5