ESC SP (space)

 

 

Set Intercharacter Space

Format:

 

 

 

ASCII code:

ESCS

P

n

Decimal:

27

32

n

Hexadecimal:

1B

20

n

Comments:

Sets the amount of space added to the right of each character, in addition to the space already allowed in the design of the character. The number of units of space is equal to n, which should be from 0 to 127. Each unit of space is 1/120th of an inch. This command is available in both draft and NLQ.

Character

Sets

 

 

 

ESC t

 

 

 

Select Character Table

 

 

 

 

 

Format:

 

 

 

 

ASCII

code:

ESC

t

n

Decimal:

 

27

116

n

Hexadecimal:

1B

74

n

Comments:

The following values can be used for n:

0:Selects italic character set.

1:Selects Epson Extended Graphics character set.

Selects the character table used by ASCII codes 128 through 255. Selecting Epson Extended Graphics does not disable italic printing. Italic printing can still be selected by ESC 4. Duplicates and overrides the function of DIP switch 1-3. Note that the value of n must equal 00 hex or 01 hex; the characters “0” and “1” cannot be used. See Appendix A for the character tables.

Command Summary 8-33