Using DIP Switches

The DFX-5000 has two sets of DIP switches. DIP switches control a variety of printer functions such as page length and printing speed. DIP switch settings are shown in the DIP switch tables starting on page 3-10 and in the Quick Reference card at the back of this manual. Descriptions of all the DIP switch functions are provided in the section on DIP switch functions on page 3-12.

Because the factory (default) settings are designed to accommodate the needs of most users, you shouldn’t need to change DIP switch settings very often. If you do need to set a DIP switch, use the following steps-being sure to turn off the printer before you start and turn it on again when you are done.

Changing DIP switch settings

To change a DIP switch setting, follow these steps:

1.Turn off the printer.

2.Open the printer’s front cover.

3.The DIP switches are located in a small compartment on the front paper guide, behind the front tractor paper. If there is paper loaded on the front tractor, either remove it or lift it up out of the way so you can reach the DIP switches.

3-8 Using the Printer