The following steps show you how to load paper using the optional pull tractor with the printer’s built-in front tractor.

1.Turn on the printer and open the top cover.

2.Make sure there is paper loaded to the top of form position. If

there already is paper on the tractor but it is in the standby position, press FRONT/REAR or LINE FEED/LOAD (depending on which tractor is selected) to load the paper to the top of form position. If there is no paper in the tractor at all, load paper as described on page 2-3.

3.Once you have paper loaded on the printer’s front tractor, use the FORM FEED button to advance the paper to the pull tractor.

4.Release both sprocket lock levers on the pull tractor by pulling them toward you. Then open both sprocket covers.

6-6 Using the Printer Options