3.Use the MICRO FEED buttons to position your paper to where you want the bottom edge of your next line of text to fall. If you are printing on labels, use only the forward-feeding(top)

MICRO FEED button.

4.When you are finished, press the ON LINE button to exit the top of form mode. (Do not press the TOP OF FORM button to exit the top of form mode. If you do, the printer remembers your new printing position as the new top of form position instead.)

Using Automatic Tear-Off

The TEAR OFF button lets you feed the perforation of your paper to the printer’s tear-off edge when you are finished printing. This makes it easier to tear off the last printed sheet and saves paper normally lost between documents.

If you need to adjust the position of the perforation so that it meets the printer’s tear-off edge, you can reset the tear-off position by entering the tear-off mode and using micro-feed. The printer remembers this new tear-off position and uses it as a reference point for feeding the paper. (The printer remembers separate tear-off positions for the front and rear tractors.)

The following steps show you how to use the automatic tear-off feature. Before you start, make sure that the printer is turned on and the desired tractor is selected.

WARNING: Never use the TEAR OFF button with labels. If labels are fed backward, they may jam the printer.

2-20 Loading and Using Paper