9.Close the sprocket covers. Slide the sprocket units so that the paper is straight and smooth, and then lock them into place.

10.Adjust the top of form position as described in in Chapter 2.

11.Press the FORM FEED button to form feed the paper out the back of the printer. Make sure the edge of the first sheet emerges below the paper separator.

12.Close the top cover and press the ON LINE button so you are ready to print.

Removing the pull tractor

Follow these steps to remove the pull tractor. You’ll need a cross-head screwdriver and the paper separator that originally was installed on the printer.

1.Remove any paper installed on the tractor and turn off the printer.

6-14Using the Printer Options