2.Plug the power cable into the AC inlet on the printer’s rear panel.

Note: If you move to another country, you may need to change the voltage of the printer. See your dealer for information.

Testing the Printer

Now that your printer is fully assembled, you can use your printer’s built-in test function to be sure the printer is working correctly before you connect it to a computer.

Before performing the test, you need to plug in your printer and load paper.

Plugging in the printer

Follow these steps to plug in the printer:

1.Make sure the printer is turned off. (The zero (0) on the power switch should be visible.)

2.Plug the power cable into a properly grounded electrical outlet.

Setting Up the Printer 1-15