14.Check the PAPER SELECT indicator to see which tractor is selected:
•If the rear tractor arrow is lit up, press the LINE FEED/LOAD button to load the paper.
•If the front tractor arrow is lit up, make sure the printer is off line and then press the FRONT/REAR button to switch to the rear tractor. When the printer switches tractors, it also loads the paper automatically.
15.Press the ON LINE button to put the printer on line so it is ready to print. The paper is now loaded to the top of form position. If it looks like the printing will start too high or low on the page, see the next section for instructions on adjusting the top of form position.