Crestron RoomView
®
is an integrated control system provided by
Creston
®
. It can be used to monitor and control multiple devices connected
on a network.
The Projector supports the control protocol, and can therefore be used in a
system built with Crestron RoomView
®
.
Refer to the Creston
®
website for details on Crestron RoomView
®
. (Only
English-language displays are supported.)
http://www.crestron.com
An overview of Crestron RoomView
®
is provided below.
•Remote operation using a We b browser
A Projector can be operated from a computer window just like using a
remote control.
•Monitoring and control with application software
Crestron RoomView
®
Express or Crestron RoomView
®
Server Edition
provided by Creston
®
can be used to monitor devices in the system, to
communicate with the help desk, and to send emergency messages. Refer
to the following website for details.
http://www.crestron.com/getroomview
This manual describes operating procedures in the computer window using
a Web browser.
q
•Only single-byte alphanumeric characters and symbols can be
entered.
•The following functions cannot be used while using the Crestron
RoomView
®
.
Web Control s p.112
Message Broadcasting (EasyMP Monitor plugin)
•Controling is possible if Standby Mode is set to Communication
On from the Extended menu of the projector's configuration menu,
even if the projector is in standby state (when the power is off).
s p.61
Operating a Projector from a Computer Window
Displaying the operation window
Confirm the following before performing the procedure.
•Make sure the computer and projector are connected to the network.
When communicating with a wireless LAN, connect in Advanced mode.
s p.70
•Set RoomView to On on the Others menu under the Ne twork menu.
s p.80
Procedure
A
Start the Web browser on the computer.
B
Enter the IP address of the projector in the address fiel d of the
Web browser, and press the [Enter] key on the keyboard.
The operation window will be displayed.
About Crestron RoomView® (EB-G5950/G5650W only)119