The projector can be mounted on a ceiling or placed on a desk as shown
below.
Warning
•
A special method of installation is required when suspending the projector from
a ceiling (ceiling mount). If installation work is not carried out correctly, the
projector could fall down. This may result in injury or accidents.
Contact your dealer or the nearest address provided in the Support and Service
Guide if you want to use this install ation method.
s
Epson Projector Contact
List
•
If you use adhesives on the Ceiling mount fixing points to prevent the screws
from loosening, or if you use things such as lubricants or oils on the projector,
the projector case may crack causing it to fall from its ceiling mount. This
could cause serious injury to anyone under the ceiling mount and could
damage the projector.
When installing or adjusting the ceiling mount, do not use adhesives to prevent
the screws from loosening and do not use oils or lubricants and so on.
Attention
•
Do not use the projector on its side. This may cause malfunctions to occur.
•Suspend the projector from the
ceiling and project images from
in front of a screen.
(Front/Ceiling projection)
•Suspend the projector from the
ceiling and project images from
behind a translucent screen.
(Rear/Ceiling projection)
•Project images from in front of
the screen. (Front projection)
•Project images from behind a
translucent screen. (Rear projec-
tion)
q
•An optional ceiling mount is required when suspending the
projector from a ceiling.
s "Optional Accessories and Consumables" p.147
Switching the Projection Mode
Switch the Projection mode according to the installation condition so that
a suitable projected image is obtained.
Procedure
During projection, hold down the [A/V Mute] button on the remote
control for about five seconds.
Installation Methods131