Caution
Check the positions of the (+) and (-) marks inside the battery holder to ensure
the batteries are inserted the correct way.
C
Replace the battery cover.
Press the battery compartment cover until it clicks into place.
If delays in the responsiveness of the remote control occur or if it does not
operate after it has been used for some time, it probably means that the
batteries are becoming flat. When this happens, replace them with new
batteries. Have two AA size alkaline batteries ready. You cannot use other
batteries except for the AA size alkaline.
Operating range of remote control
When using the remote control, point the remote control light-emitting
area at the remote receiver on the projector. The operating range of the
remote control that is provided with the projector is shown below.
Horizontal operating range
Vertical operating range
q
•To restrict reception of the operation signals from the remote
control, set the Remote Receiver on the Set menu. s p.59
•When using a remote control provided with other Epson projectors,
set the Remote Control Type on the Extended menu. s p.61
The operating range will depend on the remote control that you
use.
Part Names and Functions
19