Check Remedy
Is Position adjusted correctly? Press the [Auto] button on the remote control or the [Enter] button on the control panel to perform automatic
adjustment when projecting the computer analog RGB signals. If the images are not adjusted correctly after using
automatic adjustment, you can make the adjustments using Position from the configuration menu.
Apart from computer analog RGB signals, you can adjust other signals while projecting by adjusting Position from the
configuration menu. s Signal Menu - Menu Position p.57
Is the computer set for dual display?
Only when projecting computer images
If dual display is activated in the "Display Properties" of the computer's Control panel, only about half of the image on the
computer screen is projected. To display the entire image on the computer screen, turn off the dual display setting. s
Computer video driver documentation
Is the correct resolution selected?
Only when projecting computer images
Set the computer so that the signals being output are compatible with the projector.
s "Supported Monitor Displays" p.151 s Computer documentation
Image colors are not right
Check Remedy
Do the input signal settings match the signals from the connected
device?
Change the setting according to the signal for the connected equipment. s Signal Menu - Input Signal, Video Signal
p.57
Is the image Brightness set correctly? Adjust the Brightness setting from the configuration menu. s Image Menu - Brightness p.55
Are the cables connected correctly? Check that all the cables required for projection are securely connected. s p.133, p.135
Is Contrast
g
adjusted correctly? Adjust the Contrast setting from the configuration menu. s Image Menu - Contrast p.55
Is the Color Adjustment correctly? Adjust the Color Adjustment setting from the configuration men u. s Image Menu - Color Adjustment p.55
Are the Color Saturation and Tint adjusted correctly?
Only when projecting images from a video source
Adjust the Color Saturation and Tint settings from the configuration menu. s Image Menu - Color Saturation, Tint
p.55
Images appear dark
Check Remedy
Is the image Brightness set correctly? Adjust the Brightness and Power Consumption settings from the configuration menu.
s Image Menu - Brightness p.55 s Settings Menu - Power Consumption p.59
Is Contrast
g
adjusted correctly? Adjust the Contrast setting from the configuration menu.
s Image Menu - Contrast p.55
Problem Solving
95