Name Function
I[Page] buttons
[[][]]
These buttons can be used to page up and down when
projecting an image from a computer that is connected to
the projector through the network. These buttons can be
used to switch the screen when projecting with PC Free.
(EB-G5950/G5650W only)
These buttons can be used to page up and down when
using the optional wireless mouse receiver.
J[A/V Mute] button Turns the video and audio on or off. (EB-G5950/G5900/
G5650W/G5600)
Turns the video on or off. (EB-G5800/G5500) s p.38
K[Split] button Press this button to split the screen in two and project two
images simultaneously. s p.34
This button does not function when using EB-G5800/
G5500.
L[Auto] button If pressed during projection of computer analog RGB
signals, it automatically adjusts the Tracking, Sync., and
Position to project the optimum image.
M[Aspect] button The Aspect Ratio
g
changes each time the button is
pressed. s p.29
N[ID] button Press to set the remote control ID. s p.43
O[Help] button Displays and closes the Help screen which shows you how
to deal with problems if they occur. s p.85
PRemote port Connects the optional remote control cable set and
outputs signals from the remote control. (EB-G5950/
G5900/G5650W/G5600 only)
When the remote control cable is plugged into this remote
port, the remote receiver is disabled.
Name Function
Q[Volume] button
[][ ]
[] Decreases the volume. [ ] Increases the volume.
s Quick Start Guide
This button does not function when using EB-G5800/
G5500.
Caution
Do not start when the volume is set too high.
Loud sounds may cause loss of hearing. Always low-
er the volume before turning off the projector. Grad-
ually increase the volume after turning on the pro-
jector.
R[Num] button Use this button to enter passwords, IP Address from the
Network, and so on.
SNumeric buttons Use this button to enter passwords, remote control ID
settings, IP Address from the Network, and so on.
T[Color Mode] button Each time the button is pressed, the Color Mode changes.
s p.33
U[Freeze] button Images are paused or unpaused. s p.38
V[E-Zoom] buttons
[z][x]
The [z] button enlarges the image without changing the
projection size.
The [x] button reduces the parts of images that have been
enlarged using the [z] button. s p.40
W[Pointer] button Press to activate the on screen pointer. s p.39
X[Esc] button Stops the current function. If pressed when the
configuration menu is displayed, it moves to the previous
menu level. s p.54
Acts as a mouse's right button when using the optional
wireless mouse receiver.
Part Names and Functions
17