You can select the aspect mode according to the type of input signal, ratio
of height and width, and resolution to switch the Aspect Ratio
g
of the
projected image. The aspect modes are listed below. The aspect modes that
can be set depend on the type of image that is being projected.
EB-G5950/G5900/G5800/G5600/G5500
Aspect mode Explanation
Normal Projects to the full projection size retaining the aspect
ratio of the input image.
Auto Projects in an appropriate aspect ratio based on
information from the signal being input.
4:3 Projects to the full projection size at an Aspect of 4:3.
This is ideal for when you want to project images at an
aspect of 5:4 (1280 x 1024) to the full projection size.
16:9 Projects at a 16:9 aspect ratio. This is ideal for projecting
at full screen size when using a 16:9 screen.
Native Projects at the resolution of the input image size to the
center of the screen. This is ideal for projecting clear
images.
If the image resolution exceeds the panel resolution
(1024 x 768) of the projector, the edges of the image are
not projected.
EB-G5650W
Aspect mode Explanation
Normal Projects to the full projection size retaining the aspect
ratio of the input image.
Auto Projects in an appropriate aspect ratio based on
information from the signal being input.
16:9 Projects to the full projection size at an aspect ratio of
16:9.
Full Project at full size.
Aspect mode Explanation
Zoom Projects the input image enlarged to the full lateral
direction size as the aspect ratio remains. Parts that
extend beyond the projection size are not projected.
Native Projects at the resolution of the input image size to the
center of the screen. This is ideal for projecting clear
images.
If the image resolution exceeds the panel resolution
(1200 x 800) of the projector, the edges of the image are
not projected.
Procedure
Remote Control
The aspect mode name is displayed on the screen by pressing the button.
If you press the button while the aspect mode name is displayed on the
screen, it changes to the next aspect mode.
q
The aspect mode can also be set using Aspect in the Signal menu
from the configuration menu. s p.57
Changing the Aspect Ratio of the Projected Image
29