D
Move the box to select the part of the image to use as the
User's Logo.
Using the Remote Control Using the Control panel
q
You can save at up to 400 ^ 300 dots in size.
E
When "Select this image?" is displayed, select "Yes".
F
Select the zoom factor from the zoom setting screen.
G
When the message "Save this image as the User's Logo?" is
displayed, select "Yes".
The image is saved. After the image has been saved, the message
"Completed." is displayed.
q
•To use the saved user's logo as the screen image, set it in the
Display settings under the Extended menu. s p.61
•When a User's Logo is saved, the previous User's Logo is erased.
•Saving the user's logo may take approximately 15 seconds. Do not
use the projector or any connected equipment while it is saving,
otherwise malfunctions may occur.
Saving a User's Logo
48