User’s Guide

Preventing theft (Password Protect)

 

33

 

 

 

2

Turn "Power ON Protect" on.
(1)Select "Power ON Protect", and then press the [Enter]

 

 

 

button.

 

(2)Select "ON", and then press the [Enter] button.

 

(3)Press the [Esc] button.

 

 

 

 

 

 

 

 

3

"Timer" setting allows you to specify the time interval
for password prompt.

 

If you don't use this setting, proceed to step 4.(1)Select "Timer" and then press the [Enter] button.

(2)While holding down the [Num] button, use the numeric keypad buttons to enter the setting time within the range of 0 to 9999 hours and then press the [Enter] button.

If you make a mistake entering the time, press the [Esc] button and re-enter the time.

When you have finished using the "Password Protect" menu, the countdown for the elapsed time will start.

4

Turn "User’s Logo Protect" on.

(1)

Select "User’s Logo Protect", and then press the [Enter]

 

 

 

button.

 

(2)

Select "ON", and then press the [Enter] button.

 

(3)

Press the [Esc] button.

 

 

 

 

 

 

 

 

5

 

Enter the password.

 

(1) To set a password, select "Password" and then press the

 

 

 

 

 

[Enter] button.

 

 

(2) The message "Change the password?" will be displayed,

 

 

 

so select "Yes" and then press the [Enter] button.

 

 

 

The default setting for the password is "0000", but you

 

 

 

should change this to your own desired password.

 

 

 

If you select "No", the screen shown at step 1 will be

 

 

 

displayed again.

 

 

(3) While holding down the [Num] button, use the numeric

 

 

 

keypad buttons to enter a 4-digit number. The number

 

 

 

entered will be displayed as "* * * *".

 

 

 

Once four digits have been entered, the confirmation

 

 

 

screen will be displayed.

 

 

(4) Re-enter the password.

 

 

 

The message "The new password is stored." will be

 

 

 

displayed.

 

 

 

If you enter the password incorrectly, a message will be

 

 

 

displayed prompting you to re-enter the password.

 

 

 

 

 

 

 

 

 

 

6

 

Once the setting is complete, press the [Menu]

 

button.

 

 

 

 

 

 

TIP

 

 

 

 

 

 

 

•When the set time has elapsed and the password is entered, projection will start and the "Timer-elapsed" counter will be reset. •Make a note of the password so that you do not forget it and keep it in a safe place.

•If you lose the remote control, you will not be able to enter the password. Keep the remote control in a safe place at all times.